Distance from Park Ridge to Longwarry
The distance between Park Ridge, Australia and Longwarry, Australia is 1,341 km (833 miles) in a straight line. If a road route exists, expect roughly 1677 km (1042 miles) by car — around 20 h 58 min of driving.
| Measure | Value |
|---|---|
| Straight-line distance | 1,341 km / 833 mi |
| Road distance (estimate) | ≈ 1677 km / 1042 mi |
| Driving time (estimate) | ≈ 20 h 58 min |
| Flight time (estimate) | ≈ 2 h 5 min |
Road distance and travel times are estimates based on the straight-line distance (road factor 1.25, average speed 80 km/h) — actual routes vary.
| Place | Latitude | Longitude |
|---|---|---|
| Park Ridge, Australia | -27.709084132 | 153.07618977 |
| Longwarry, Australia | -38.111130408 | 145.775858251 |
Frequently asked questions
How far is Longwarry from Park Ridge?
The straight-line (air) distance from Park Ridge, Australia to Longwarry, Australia is 1,341 km (833 miles). By road it is roughly 1677 km (1042 miles), depending on the route.
How long does it take to drive from Park Ridge to Longwarry?
Approximately 20 h 58 min, assuming an 80 km/h average over an estimated road distance of 1677 km. Actual time depends on the route, traffic and border crossings.
How long is the flight from Park Ridge to Longwarry?
A direct flight covers 1,341 km in about 2 h 5 min at typical cruise speed, plus airport time. Not all city pairs have direct flights.
How do I calculate distances for a whole list of locations?
Upload a CSV or Excel spreadsheet to the batch distance calculator — it computes the distance for every origin–destination row at once. The first records are free to try.
Related distances
Distance from Longwarry to Park Ridge (reverse route)
GPS coordinates of Park Ridge GPS coordinates of Longwarry