Distance from Millstream to Rankin Park
The distance between Millstream, Australia and Rankin Park, Australia is 1,810 km (1,124 miles) in a straight line. If a road route exists, expect roughly 2262 km (1406 miles) by car — around 28 h 16 min of driving.
| Measure | Value |
|---|---|
| Straight-line distance | 1,810 km / 1,124 mi |
| Road distance (estimate) | ≈ 2262 km / 1406 mi |
| Driving time (estimate) | ≈ 28 h 16 min |
| Flight time (estimate) | ≈ 2 h 38 min |
Road distance and travel times are estimates based on the straight-line distance (road factor 1.25, average speed 80 km/h) — actual routes vary.
| Place | Latitude | Longitude |
|---|---|---|
| Millstream, Australia | -17.657129737 | 145.418017727 |
| Rankin Park, Australia | -32.924859291 | 151.680116917 |
Frequently asked questions
How far is Rankin Park from Millstream?
The straight-line (air) distance from Millstream, Australia to Rankin Park, Australia is 1,810 km (1,124 miles). By road it is roughly 2262 km (1406 miles), depending on the route.
How long does it take to drive from Millstream to Rankin Park?
Approximately 28 h 16 min, assuming an 80 km/h average over an estimated road distance of 2262 km. Actual time depends on the route, traffic and border crossings.
How long is the flight from Millstream to Rankin Park?
A direct flight covers 1,810 km in about 2 h 38 min at typical cruise speed, plus airport time. Not all city pairs have direct flights.
How do I calculate distances for a whole list of locations?
Upload a CSV or Excel spreadsheet to the batch distance calculator — it computes the distance for every origin–destination row at once. The first records are free to try.
Related distances
Distance from Rankin Park to Millstream (reverse route)
GPS coordinates of Millstream GPS coordinates of Rankin Park